Lv 2367 points

YamahaPhan

Favorite Answers28%
Answers50
  • Help, Chevy old school engine chokes out after turning key off?

    When I turn the key off, for a quick second the engine tries to start it self up in a "choke" like manner. After it does its thing, the engine is off. Its intermediate, happens more when warmed up. 

    sequence is, Engine running, turn the key off, engine off, engine then runs in a "choke" like way ( best way to describe it is that it sounds like there is little bits of gas left in the carb and its burning that last bit off shaking and barely running), then engine completely off.

    I do have issues with starting, I have to hold to key and wait a few seconds for the starter to engage sometimes.

    I don't know much about chevy engines, any respond would be appreciated.

    9 AnswersMaintenance & Repairs3 months ago
  • Attachment image

    What kind of spider is this?

    I'm located in California.

    2 AnswersZoology5 months ago
  • 1966 Ford Mustang V8 Conversion Using 1968 Donor?

    I have a 1966 factory straight 6 manual

    using 1968 v8 donor all complete.

    Is this a direct interchange for the main portion of the swap? Engine and trans, power steering, brake booster, and rear end?

    Looks like I need to change the bottom crossmember as the 68 seem deeper and also the engine mount brackets.

    Any tips or heads up appreaciated!

    1 AnswerFord5 years ago
  • How to install OSX new SSD Macbook Air?

    Hi,

    A friend wants to upgrade her macbook air drive space to a bigger one. I bought one from OWC and trying to figure out how to install a clean copy of OSX. I keep running into the screen with a folder and a "?". Heres what i have done.

    I downloaded Lion and went through the content folder to burn the .DMG file for Lion.

    I made a boot disc.

    Place the Boot disc to the usb drive. Held "C" when turning on the macbook air

    I made a USB Flash drive boot disc as well, same results.

    1 AnswerOther - Computers9 years ago
  • Removing decal on carbon fiber bicycle?

    My buddy gave me a bicycle which is all carbon fiber. It has really tacky decals on it, he said he paid a shop to put it on. How would i come accross getting these out without messing up the bike, im close to using sand paper and sanding it down then buying clear coats for it. Good idea? Bad idea? You expertise? Much appreciated!

    4 AnswersCycling9 years ago
  • Americans with Disabilities Act 1990?

    I have received a lawsuit concerning this issue. I have a security company and one of my guards refused a man with a dog to come inside the store. After speaking with a lawyer, it appears that this guy does this for a living. He purposely goes into these asian stores and because most asian markets arent educated with these things, he sues them after any refusal of entry happens. Last year, he opened 150 cases including mine.

    My question is, is there any protection against people like us, us as in the 150 groups getting sued for the same reason, against people like him, who PURPOSELY abuse the law towards people with out much education in these rules and laws? Any help will be greatly appreciated.

    4 AnswersPeople with Disabilities10 years ago
  • Alarm doesnt work 2000 SLK 230?

    Ok. I checked my PSE module and it was bad. Before, the lights wouldnt shut off. So i replaced the module and the wiring harness for the PSE, the wires were all burnt. I spliced the new harness to a section behind/lower bottom of the passenger seat. Now everything works besides the alarm. The lights doesnt stay on, the parking light doesnt stay on (before these would stay on even if the car is off). it took me 5 hours to replace all of this. I dont mind tracing my steps. but im positive that every wire is connected. Any advice? Much appreciated. Also if you guys got some knowledge on which wire is for the alarm, I can use that and trace it to see if anything is wrong.

    1 AnswerMercedes-Benz10 years ago
  • plug inside gas tank burnt?

    well i removed my fuel pump cause i had issues getting the car started. i noticed the problem. my plug from the inside was burnt. the wires are burnt as well. now theres 4 plugs in the socket, two of them are burnt, the other two are not used. im thinking of move it over to the plugs that arent being used. question is, will it be safe for me to solder up direct wires to the plug and direct it to my fuel pump? also what type of compound could i add to the plug so that it wont burn out again. i know factory put some paste with the sockets.

    1 AnswerMaintenance & Repairs1 decade ago
  • Can you park/leave your boat in front of your house?

    i live in Sacramento, California. i have an opportunity to get a boat but it wont fit on my drive way, can i park it in front of my house for the summer? my neighborhood is a one sided, as in there is a brick wall across the street. 17ft small boat.

    5 AnswersBoats & Boating1 decade ago
  • can you leave/park your boat in front of your house by the sidewalk?

    i live in Sacramento, California. i have an opportunity to get a boat but it wont fit on my drive way, can i park it in front of my house for the summer? my neighborhood is a one sided, as in there is a brick wall across the street. 17ft small boat.

    2 AnswersJokes & Riddles1 decade ago
  • New video card install, hidden problems?

    I have a eMachine and my screen is wavy. The video card is integrated so im planning on going out and buying a new video card and placing it in the PCI slot. Thing is, is that all to it? Put it in and done? or is there extra necessary steps that needs to be done. yes i know that i need to get the right program to run it and all, but im meaning messing with BIOS. Thanks.( ps: i know its not my monitor because ive tested it on TV/ other LCD screens and its wavy even before it loads up windows)

    2 AnswersAdd-ons1 decade ago
  • Whats a good office laser printer/fax/scan/copier?

    Well my office would like to stop buying ink cartridges. we run through them fast usually every 2-3 weeks. I've been told that a laser printer will save us money in the long run. So im asking you guys, whats a very good but affordable ($600-) laser printer with the extras I've listed? Thanks!

    2 AnswersPrinters1 decade ago
  • Xbox 360 One red light?

    well my uncle knocked over the xbox when it was standing up. i later turn it on and the screen doesnt load. after a few seconds one of the bottom lights blinks red. i searched but couldnt find any great details on it. what could i possible do to fix this. its modded so i cant turn it in. im also not interested in doing a swap from the store. it was purchased modded. i actually open the thing and renewed the thermo paste but that didnt do anything.

    3 AnswersXbox1 decade ago
  • is my compression normal? how to fix?

    i did a compression test (measure pressure where the spark plugs are). these are my results from left to right. 170-75-105-180. i left open all slots when i did the check. unpluged the ecu. each time i cranked 5 sec, stopped then 5 more sec. it doesnt look right to me. its from a 1990 honda crx si.

    4 AnswersMaintenance & Repairs1 decade ago
  • Failed smog with high HC reading?

    my smog report tells me that everything is right besides high HC readings. after my research i found out it can be cause by spark plugs, air filter, and wires. also others but mainly that. i changed out my spark plugs n air filter. the spark plugs were in a 3/10 condition and air filter 3/10 also.. question is, how high of a HC will bad spark plugs give? reason because i have one freetest and i dont want to pay another $50. if theres other things i should look at please recommend me towards that. thanks!

    max was roughly 150. i measured at 358.

    2 AnswersMaintenance & Repairs1 decade ago
  • Where to get a copy of Window Vista home 64bit?

    i have this laptop with a 64bit processor but has a 32 bit windows vista installed. reason is because someone accidentally installed a new windows vista 32bit over its original vista 64bit. i dont want to buy one just for it, is there anyway where i can get a copy just so that i can install and use 64 bit?

    6 AnswersSoftware1 decade ago
  • how to tell if the laptop has 32 bit or 64 bit?

    well i have this laptop where someone with no knowledge of using computer reinstalled a new windows vista on this computer. so with all that said, everything was wiped. im now questioning if this laptop is a 32 bit or 64 bit. i typed in dxdiag and the processor says :AMD Turion(tm) 64 X2 Mobile Technology TL=58 (2CPUs), 1.9GHz. is that a 64 bit CPU?

    4 AnswersLaptops & Notebooks1 decade ago
  • How can i turn my softmod wii back into orginal state?

    How is it possible? Can i just reinstall 4.2? Will it cause damages? Im returning it back to the store and dont want any trace of any of this.

    2 AnswersNintendo Wii1 decade ago
  • Softmodding Nintendo WII Phrase definition.?

    "scrub the update and region free your backups". Im having trouble understanding what exactly this means.

    1 AnswerNintendo Wii1 decade ago
  • macbook help, how do i remove the orginal DNS?

    Is there anyway for me to remove the DNS i circled completely?

    http://img.photobucket.com/albums/v424/airphan/dns...

    2 AnswersComputer Networking1 decade ago