What are the rules to build your own software program from a open computer chip?

Question

Can you please help. But first let me explain that, do you have to burn the chips onto the dive? Or buy one_? I'll write more later... 

Answer 1

TROLL ALERT!!!!!!!!!!

Answer 2

[sigh] you know so little that i can only recommend you begin studying at your local community college

Answer 3

How are you opening the computer chip--screwdriver, pliers, X-Acto knife, or hammer?  What type of "chip" is it?  What software program do you want to "build"?

Have you ever taken a "dive" with any burning chips before?  What did you dive into?

Give more details.

Answer 4

You need to give a lot more information about what "chip" you want to use & what for?

"Burn the chips onto the drive" makes no sense, sorry.. 

If you are writing a program for a PC, then it is just software you write and run.

If you want to program a microcontroller such as PIC, then you buy the appropriate PIC IC (chip), write the program using a suitable editor and assembler or compiler; MPLab X for the PIC series, here:

https://www.microchip.com/mplab/mplab-x-ide

Then transfer the program to the IC using a programmer such as a PICKIT 3 or now PICKIT 4.

https://www.ebay.co.uk/itm/PICKIT3-Programmer-Univ...

Example PIC microcontrollers:

https://www.digikey.com/product-detail/en/microchi...

https://www.digikey.com/product-detail/en/microchi...

https://www.digikey.co.uk/product-detail/en/microc...

For different makes of microcontroller, you use different software packages.

eg. for the Arduino modules, you use this:

https://www.arduino.cc/en/main/software

That allows you to program arduino modules such as these:

https://www.sparkfun.com/products/11021

And there are many more makes and types.